BEWARE! AeroCatch Imitations

Coast Fabrication, Inc.

We hold racing together.

BEWARE: AEROCATCH IMITATIONS

These counterfeit imitations:

All genuine AeroCatch products have both the registered design number and "www.aerocatch.com" in raised lettering on the housing.

Specialty Fasteners and Coast Fabrication are working vigorously to pursue all registered design and trademark infringements.


	NRG Racing: Carbon Fiber Locking Flush Hood Pin Set
	Body and handle made from weaker material; Pivot pins NOT welded in place (allows pins to fall out); No secondary lock button; Shear pin made from MILD steel, "carbon fiber" is merely a sticker on the surface that peels off; Lock cam nut held in place by 3 threads (with no thread lock feature the nut cam can fall off allowing latch to open); Keys captive in the unlocked position (needing 2 separate keys to open the hood); Hole in strike pin is off-set (making the pin weaker on one side)


	Holding Monster
	Body and handle made from weaker material; MILD steel shear pin is prone to corrosion in strike contact area; pivot pins NOT welded in place




	JDM Sport
	Body and handle made from weaker material; Lock button is fixed and does not act as a secondary lock; Housing is cut away to allow the lock the function (thus making it weaker); Handle needs to be pushed down at one end in order to open; MILD steel shear pin is prone to corrosion in strikes contact area; Pivot pins NOT welded in place




	Top Speed Pro 1
	Made from aluminum: poor finish, heavy; Very stiff action with a grinding feel; No side entry apertures; MILD steel shear pin is prone to corrosion in strikes contact area




	D1 Sanko D1 Generation
	Body and handle are made from weaker material; Body is distorted due to material shrinkage; Pivot pins NOT welded in place